View Full Version : SLAB PLAN
2010-05-14, 05:29 PM
Is there a way to turn off a portion of a wall (see attached image) in plan? I only want to show the CMU wall and not the veneer in our slab plan.
thanks in advance
2010-05-14, 05:38 PM
The only suggestion I can give is to try the Cut Profile tool. I doubt this is going to be worth the time to you but I don't know how important it is to use the actual wall versus just putting down a filled region in the slab plan.
2010-05-14, 06:01 PM
Could modify the wall so that the portion of the wall you want to hide is maybe 1 or 2" above the slab....then set your cut plane for the view just under that...
Or just have a wall type of the structure only on a different workset and use it just for the slab plan....
2010-05-14, 06:09 PM
Before posting, please do a search, as this same topic has been discussed here:
That said, the Edit Cut Profile tool is probably a good solution to your question,
if you just need that in a particular view.
Powered by vBulletin® Version 4.1.11 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.