Display bar results

[medo]

How to display reinforcement results for bars for each end of the bar?
See the attached pics and for instance uppermost horizontal bar. It lack results on the left and right corner. I want to present the results on each end and in the middle of the bars. The program scales and displays some of the results. This also happens when displaying other results, like moments and forces.

[smm.144]

I have the same problem, some times using text instead of lables in the parameters tab makes more values to appear. I also sometimes reduce the symbo size in display dialog box, but this makes them unreadable when they are printed. These are not real solution for this problem. Any body has a better solution?

[Tomasz.Fudala]

For the two options (labels and text), you can use the Values selection field to limit the number of diagram descriptions displayed. The following options are available:
• All - Diagram descriptions are displayed for each calculated element: at its beginning and end points, as well as the points of maximum and the minimum value
• Local extremes - Diagram descriptions are displayed only for the maximum and minimum values on the bar.
• Global extremes - Descriptions are displayed only for the global maximum and minimum values, thus displaying extreme values for the whole structure.
See 01.jpg

If you want more detailed information you can run Detailed Analysis. Then the Division points tab indicates the intermediate points for which the values of selected quantities are to be presented in the table.
See 02.jpg

You can select bar and choose Object Properties from context menu. On the NTM tab in Bar Properties dialog box the table can display either the values of a selected quantity, or the extreme values of a selected quantity.
See 03.jpg

It's better to explore Reinforcement diagrams in RC module.
See 04.jpg

[medo]

Thanks Tomasz for this detailed explanation. I am aware of all those choices, but I want to present diagrams for frames, not individual members. In that case the program scales the results text on its own. I would like to display 3 values (beginning, middle, end) for each element in a frame. Is it possible to control this output somehow?

[Tomasz.Fudala]

Those diagrams present only extremes. You can try to add some nodes to your element (generate nodes without bar division) 01.png
Take a look at the element #2.
02.png

[smm.144]

Those diagrams present only extremes. You can try to add some nodes to your element (generate nodes without bar division) 01.png
Take a look at the element #2.
02.png

Thanks for the description,
As You said Setting Values to all in Diagrams dialog then the values for the beginning and ending of each bar is supposed to appear, but robot wont display some of those values, may be for better readability; Is it possible to make those values appear?!