Imported image not plotting

[Brian F.]

I have a sheet which has an imported jpeg image of a site plan. Everything on the sheet plots but the image. Seems like I've been successful with plotting other imported images but have run into a problem with this particular one. It doesn't seem to be different from other images nor is it bigger than others I've imported either.

[Steve_Stafford]

You may need to try Raster instead of Vector in the plotter settings...also see if spooling in your PC works versus spooling at the plotter, memory issues often "lose" data.

[beegee]

Coupla other things you might try :-

1. Select "Printer settings " not Black and White

2. Check that the file extension is lower case ".jpg" not upper case.

[Simon.Whitbread]

I've been getting along great, plotting full size and 50% reductions.
Then I did a drawing issue.
Plotted to multi-page DWF
Ran off a full size drawing set, all OK so far
Then an A3 set (50%)
On one printer our logo (JPG) was grossly distorted, on another it didn't print at all.
While I know that this is probably a driver issue, we have the most recent drivers installed (I Checked)
Is there anything else I may be missing?

Getting frustrated...

[Brian F.]

I think my problem was having it set for "black and white". Changed to "printer settings" and also re-imported the image again and it worked.
Thanks for your help!

[beegee]

On one printer our logo (JPG) was grossly distorted, on another it didn't print at all.
..

Can you make a .bmp of your logo and try that ?