View Full Version : Looking for a parametric folding partition
2004-04-19, 01:35 PM
Does anyone have a parametric folding partition family? It needs to span openings between 20 and 32 ft. Couldn't find anything on RUGI, Revitcity or this forum; and I am not sure how to create the family -- it needs to increase the number of panels every 4 ft. or so.
Thanks in advance.
2004-04-19, 04:32 PM
Do you need to model this or just show it in plan?
Unless showing how much room is required to stack panels is an issue, I tend to just show this type of partition as a simple accordian (?) graphic at one end with a dashed line showing the extent of the folding partition.
2004-04-19, 06:00 PM
I really would have preferred to show an interior perspective of this area with some level of accuracy. For now, I'll do it as you suggest, and perhaps add an in-place family for the perspective.
2004-04-19, 06:14 PM
I have one that will work for you. Unfortunetly, it is on a server that is down right now for service.
BTW, it will calc the stacking required, number of panels and a couple of other items. It is metric, but can be converted pretty easily.
2004-04-19, 06:37 PM
OK, server is back on line. Try these:
No guarantees though.
2004-04-19, 06:58 PM
Nice Jim :)
2004-04-20, 09:24 PM
Thanks, Jim - exactly what I needed.
2004-04-20, 10:48 PM
Good deal, glad I could be of service...
2007-05-30, 03:00 PM
Hey I was just searching for some folding partitions! :razz:
Thanks Jim, much appreciated!! :)
2007-05-31, 08:26 AM
Maddox Builders, Inc.
Powered by vBulletin® Version 4.1.11 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.