Sheet Set Manager and Callout Blocks

[jonas.hniopek]

I have had some spare time and have been playing around a bit with SSM.
But I can't find a way how to get the drawing number to show up in the section title.
My procedure:
I have a view of my detail/section and I place it on a sheet. I rename and renumber the view accordingly.
I go to the plan to show where the section is taken/cut. No problems to get the number and on what sheet the section is on.
I go back to the sheet where I have placed my view of the section. Here is where the problem is.
If I right click on the view (under "sheet views") to place my Callout block for my section it only display the dwg number that the view is on. I have tried to find another "SheetSetPlaceholder" that would be suited but I can't seem to find one.

If anyone have any idea or suggestion please let me know.

Jonas

[Mike.Perry]

Hi Jonas

Please note I have *moved* this thread from the AutoCAD General (http://forums.augi.com/forumdisplay.php?f=120) forum to this one, as I feel this particular forum is a more appropriate place for such a topic.

Thanks, Mike

Forum Manager

[Mike.Perry]

Hi

Try plugging the following search criteria into the forum search (http://forums.augi.com/search.php?) facility ( hint - limit your search to this forum "AutoCAD Sheet Set Manager (http://forums.augi.com/forumdisplay.php?f=52)" )

Key Word(s): Callout

+

The links found in the following couple of posts, should prove helpful, useful...

RE: Sheet Set in AutoCad 2005
&
RE: Starting up with Sheet Sets

Have a good one, Mike