PDA

View Full Version : images in dwfs are getting shifted and scale



SJM
2006-09-14, 06:38 PM
Have trouble plotting dwgs to dwfs that contain images. The images appears to be shifted and scaled in the dwf.

I have found a drive that plots them correctly, issue is it is not the driver that sheetset uses to plot dwfs.

How do you set the dwf drive that sheetset uses?

Mike.Perry
2006-09-15, 03:16 AM
Hi

Below is taken from the AutoCAD Online Help File [F1]...




Publish to DWF

Publishes selected sheets or a sheet set to a specified DWF file. Automatically uses settings specified in the PUBLISH command.Taking the above information into account, I believe you will normally find it is the DWF6 ePlot.pc3 file that is being used.

Have a good one, Mike

scott.sheppard
2006-09-17, 02:07 PM
http://dwf.blogs.com/beyond_the_paper/2006/03/dwf_background__2.html

The PUBLISH command is actually a hybrid. It takes the page settings from whatever device is associated with the layout. It gets its DWF file attributes from whatever is set in the DWF6 ePlot pc3 file. That's why PUBLISH is more powerful than PLOT.