mspatz
2006-09-21, 01:08 AM
Description:
Showing the little oval on the pipe network structure where a lateral connects into a manhole or inlet.
How Used:
An inlet or manhole that has 3 pipes connecting to it in a "T" shape. If you profile the top of the "T". In LDT, Pipeworks will show an oval where the lateral connects into the inlet/manhole on the profile. Civil 3D DOES NOT! That needs to be addressed.
One step further:
While we are adding this issue, why don't we do one better! If the oval is on the backside of the inlet have it show with a hidden linetype; on the front side a solid linetype.
Feature Affinity:
Piping in Civil 3D 2006....or as far as I can tell 2007.
Showing the little oval on the pipe network structure where a lateral connects into a manhole or inlet.
How Used:
An inlet or manhole that has 3 pipes connecting to it in a "T" shape. If you profile the top of the "T". In LDT, Pipeworks will show an oval where the lateral connects into the inlet/manhole on the profile. Civil 3D DOES NOT! That needs to be addressed.
One step further:
While we are adding this issue, why don't we do one better! If the oval is on the backside of the inlet have it show with a hidden linetype; on the front side a solid linetype.
Feature Affinity:
Piping in Civil 3D 2006....or as far as I can tell 2007.