View Full Version : Custom Toolbar does not stay put in AutoCAD 2006
2006-10-05, 01:07 PM
ok, I have ran across this problem before but forgot how I fixed it. I just created a custom toolbar in autocad 2006 and docked it in the top portion of the screen beside the dimension toolbar. The problem is when I shut down autocadd and restart it, the toolbar jumps to the very top (under the pulldown menus) and off the screen. I have tried locking the toolbars in place but this has not worked. Has anybody else ran across this problem?
Have you saved your workspace?
2006-10-05, 01:35 PM
I have found that saving a profile and the workspace after any changes are made keeps things in order. IIRC Robert Bell has a very good thread on this somewhere....
2006-10-06, 12:46 AM
Please note I have *moved* this thread from the AutoCAD Customization (http://forums.augi.com/forumdisplay.php?f=118) forum to this one, as I feel this particular forum is a more appropriate place for such a topic.
2006-10-06, 12:59 AM
If you require additional information on this subject, take a look at the following threads...
How do you get AutoCAD 2006 to retain a toolbar location?
Moving toolbars in ACAD Map 2006
Problems with Workspaces - Toolbars do not open in correct location
Plus, the following Knowledge Base Technical Documents from Autodesk...
ID: TS1056204 - Toolbar settings saved in workspace are ignored when AutoCAD is restarted (http://usa.autodesk.com/getdoc/id=TS10562-4)
ID: TS1056203 - Toolbars shift after restarting AutoCAD (http://usa.autodesk.com/getdoc/id=TS1056203)
Have a good one, Mike
Powered by vBulletin® Version 4.1.11 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.