RenataP
2006-10-31, 07:06 PM
Someone asked about wire numbers, If it was possible to give the same wire a different number with reference to the number at the component and the terminal.
It seems that the terminal number is linked to the wire. When looking over a ladder from the example drawings, the program automatically updates the terminal information when I insert a wire number.
If looking for more help, here are two blogs I found useful. Thanks for asking and always willing to help.
http://mfgcommunity.autodesk.com/blog/nate/ (http://mfgcommunity.autodesk.com/blog/nate/)
http://robstein.blogs.com/rob_stein_knowledge_cente/2006/06/autodesk_autoca.html (http://robstein.blogs.com/rob_stein_knowledge_cente/2006/06/autodesk_autoca.html)
If anyone has any further input...
Thanks,
Renata
It seems that the terminal number is linked to the wire. When looking over a ladder from the example drawings, the program automatically updates the terminal information when I insert a wire number.
If looking for more help, here are two blogs I found useful. Thanks for asking and always willing to help.
http://mfgcommunity.autodesk.com/blog/nate/ (http://mfgcommunity.autodesk.com/blog/nate/)
http://robstein.blogs.com/rob_stein_knowledge_cente/2006/06/autodesk_autoca.html (http://robstein.blogs.com/rob_stein_knowledge_cente/2006/06/autodesk_autoca.html)
If anyone has any further input...
Thanks,
Renata