AutoCAD 2005 Export 3D Model to DXF and STL format

[sleimgruber06]

Good afternoon,

Im currently looking at a 3d model here in A.CAD 2005 and Im not generally and A.CAD user so I was wondering if someone could help guide me into making both a .dxf file and a .stl file

TIA,

[Mike.Perry]

Hi

DXF: Look at the _.DXFOut and _.SaveAs commands.

STL: Look at the _.STLOut command.

Have a good one, Mike

[JD Mather]

When using the stlout command be sure to check an messages on the command line.
In particular the solid must be in the positive xyz octant - that is - any point on the solid must have a positive coordinate.
Also set facetres to 10 before running the stlout command.