Architectural - Dynamic Casework

[bbosley]

I have even kept the single door and double door cabinets separate. I don't want single door cabinets over 24" and don't want double door cabinets under 24".

Ive posted a couple of these before, but have made some refinements since.

I am having trouble with the double door base cabinet. the drawer pulls don't seem to want to stretch correctly.

Any advise would be appreciated.

thanks

[Rico]

I have even kept the single door and double door cabinets separate. I don't want single door cabinets over 24" and don't want double door cabinets under 24".

Ive posted a couple of these before, but have made some refinements since.

I am having trouble with the double door base cabinet. the drawer pulls don't seem to want to stretch correctly.

Any advise would be appreciated.

thanks ok, i've attached what I think you were asking about. Check the drawing for the fixed 2 door 2 drawer cabinet. The pulls for the drawers were not stretching properly because each required a stretch action of their own with a distance multiplier of .25 and .75.

go in and look, when you measure it all up and figure it all out, it makes sense. nice blocks by the way. Mind if I use them? ;)

[bbosley]

Thanks for the fix.
I thought I had tried that but must have tied it to the wrong distance parameter or something.

Use away, I wouldn't have got as far as I did without using other blocks shared here.

It seems like some of these ought to have come with Autocad out of the box.

[Rico]

Thanks for the fix.
I thought I had tried that but must have tied it to the wrong distance parameter or something.

Use away, I wouldn't have got as far as I did without using other blocks shared here.

It seems like some of these ought to have come with Autocad out of the box. I agree, some of these just seem so basic ....

Note to Chris ..... never mind about the "great blocks I was working on". Bosley here beat me to the punch. hahahaha. oh well, more time to work on the next big block. ;)

[Chris.N]

I agree, some of these just seem so basic ....

Note to Chris ..... never mind about the "great blocks I was working on". Bosley here beat me to the punch. hahahaha. oh well, more time to work on the next big block. ;)Like i'd 'never mind'..... ;) i'm gonna get the Chilton manual of DB Mods out for these babies!!! WooHoo!!!