Stretch not working when Rotated

[BRENDA_GZZ_GOMEZ]

I need help with a block that I've created. I want to be able to rotate and stretch the line and triangle. But for some reason my stretch is acting up.

[.chad]

imo - a polar stretch would be more efficient than a seperate stretch / rotate. if you dont do that, you just need to double check you selection sets. probably easiest to just rebuild the stretch and rotate actions.

[Mlabell]

I need help with a block that I've created. I want to be able to rotate and stretch the line and triangle. But for some reason my stretch is acting up.You just need to remove the actions from rotate selection set. To do so, double click the rotate action, and key in "r", then select the stretch and flip actions. Everything will then work as intended. Just to let you know adding actions to another actions selection set can yeild some whacky results.

[Chris.N]

I need help with a block that I've created. I want to be able to rotate and stretch the line and triangle. But for some reason my stretch is acting up.to answer your question, remove all affected actions by actions.

to check what i mean: select an action. if it highlights another action, double click, type 'r' (remove), enter, then select the action to remove it from the set. with stretches, just hit 'enter' to keep the stretch window defined as is and move onto the selection mode.

your block worked fine once i removed all the 'lightning' actions from under other actions.

[Chris.N]

You just need to remove the actions from rotate selection set. To do so, double click the rotate action, and key in "r", then select the stretch and flip actions. Everything will then work as intended. Just to let you know adding actions to another actions selection set can yeild some whacky results.ah, so you HAVE been paying attention!! :beer:

i actually remove ALL actions from under actions unless they're independent basepoint actions. (modified scale & rotate)

[Chris.N]

imo - a polar stretch would be more efficient than a seperate stretch / rotate. if you dont do that, you just need to double check you selection sets. probably easiest to just rebuild the stretch and rotate actions.actually, for section cuts, i still preferr the rotate/linear combo. don't have to worry about the line going slightly out of line from direction i'm wanting...

[Mlabell]

ah, so you HAVE been paying attention!! :beer:You know it. The DB info you have been putting out in AUGI is my heroin. I'll shut it before I inflate the ego! ;)

[.chad]

actually, for section cuts, i still preferr the rotate/linear combo. don't have to worry about the line going slightly out of line from direction i'm wanting...set your angle increment to something nice and round, say... 15 degrees. ;)

acutally come to think of it - our section cuts are two seperate actions also. (probably because they are heavily borrowed from yours in the first place ) /shrug

[BRENDA_GZZ_GOMEZ]

THANKS FOR ALL OF YOUR HELP