Classic menu for Civil 3D 2010

[Torino]

Good day!

Can I switch my Civil 3D 2010 to classic menu view?
Not "Autoacd classic" but "Civil 3D classic"?

[sinc]

Best bet is to try to get used to the Ribbon. Autodesk has stopped adding new commands to the menus.

But the Ribbon isn't laid out in the best way yet, so I still sometimes turn on the old-style menus. You can do that by clicking up at that little toolbar at the top-left of the screen, next to the "C", that has the Save/Open/etc. button on it.

[jpaulsen]

If you are having trouble finding an old pull-down menu command on the Ribbon there is a new help feature called "Where is My Command" that should help you find it.

[Torino]

You can do that by clicking up at that little toolbar at the top-left of the screen, next to the "C", that has the Save/Open/etc. button on it.

Thanks, it helps )
Command calls menubar.

If you are having trouble finding an old pull-down menu command on the Ribbon there is a new help feature called "Where is My Command" that should help you find it.

Thanks. Actually I don't like ribbon concept.
I lost perfomance of my work in Office and Autocad while used ribbon.

[jpaulsen]

Unfortunately, Autodesk decided not to put any new C3D commands on the pull-down menus. So if you want to do intersections or quantities or anything else new you have to use the ribbon.

[aaronic_abacus]

Torino, YOU ARE THE MAN, THAT RIBBON STUFF SUCKS, THANKS FOR THE MENUBAR COMMAND!
you saved my life . now haw do i remember MENUBAR?