Rotating Elevation Marker

[djn]

Here is the problem I have any suggestion would be great. We have a shearwall elevation of a shearwall. The wall and the grid associated with it rotated a while ago, unfortunately the elevation that was looking at the wall wasn't rotated also. Is there any way to find out what the angle of the cut line for an elevation is or is there a way to align the elevation to rotated wall? I don't know how much the grid/wall got rotated, so i don't know how far off the elevation is, all I know is that it's off.

[m20roxxers]

create a framing elevation and copy the visibility options and the 2D view elements from the seperate to another.

[djn]

That only worked partly since view was at the same angle I had redo all dimensions, and some dimensions notes that had be created. Not to mention reset the VG settings reposition the new detail on the sheet. It seems like the framing elevation view should have a setting that would allow you to realign it with a grid that moves.

[Craig_L]

Cant you just rotate this elevation to suit?

I would assume the difference in angle would be measurable?
Even try going back to an old save file (Revit should be set up to make backups so you can roll back if you need to)

Go back to an older roll back file, check the angle of the old wall position, go to new file, rotate elevation to suit....