Results 1 to 3 of 3

Thread: Plan regions not working

  1. #1
    I could stop if I wanted to
    Join Date
    2015-09
    Posts
    479
    Login to Give a bone
    0

    Default Plan regions not working

    In 2009 and 32x 2010 I could use a plan regions all day long.

    The project we are working on has 5 floors, that are really made up of 9 floors at different floor heights due to additions constructed over the years (3rd and 4th Floor have 3 different floor heights)

    To show the duct work and equipment correctly, duct-work and associated equipment is hosted to the corresponding level, and then we use plan regions (about 4-6 for the 3rd and 4th floor) so that these items show or do not show.

    There were no issues with this with RME 2009 or with 32x 2010. When we went to 64x 2010 and update 2 we noticed that the plan regions were not working anymore.

    I would really like to get my hands on a copy of Update 1 for 64x RME 2010, to see if they really fixed this.

  2. #2
    Revit MEP Moderator mjdanowski's Avatar
    Join Date
    2007-03
    Posts
    890
    Login to Give a bone
    0

    Default Re: Plan regions not working

    Define "not working". Also, did you start the project in 2009 and then attempt to switch to 2010?

  3. #3
    I could stop if I wanted to
    Join Date
    2015-09
    Posts
    479
    Login to Give a bone
    0

    Default Re: Plan regions not working

    Yes we started in 09 and then went to 2010. (Rumor has it, that this is an issue. But i'm pretty sure i have tested the functionality of a plan region in 2010 and have seen the same problem)

    The plan region will display correctly for Arch/struct Links but not display correctly for some mech equipment or ductwork. Fittings seem to show/not show like they should. It may have to do with the families.

Similar Threads

  1. Plan Regions and Masking Regions don't work
    By buhrito in forum Revit MEP - General
    Replies: 17
    Last Post: 2012-09-07, 04:00 PM
  2. Floor plan regions not working
    By lmc in forum Revit Architecture - General
    Replies: 1
    Last Post: 2009-02-06, 05:27 PM
  3. Plan Regions not working
    By sfaust in forum Revit Architecture - General
    Replies: 7
    Last Post: 2008-02-18, 07:02 PM
  4. Fill Regions not working in Annotation Tag
    By barathd in forum Revit Architecture - General
    Replies: 4
    Last Post: 2005-10-02, 10:19 PM
  5. Hiding crop regions not working for me
    By blads in forum Revit Architecture - General
    Replies: 5
    Last Post: 2004-06-01, 05:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •