Results 1 to 6 of 6

Thread: Toggle layers on and off.

  1. #1
    Member
    Join Date
    2015-12
    Location
    Las Vegas, NV
    Posts
    20
    Login to Give a bone
    0

    Default Toggle layers on and off.

    Hello,
    I have a single user of MapGuide that is not able to check or uncheck any layers. This happen onces before but when away. Do any one have any ideas?

    Thanks Corn

  2. #2
    Geospatial Moderator Jmurphy's Avatar
    Join Date
    2000-11
    Location
    TN/KY Area
    Posts
    1,640
    Login to Give a bone
    0

    Default Re: Toggle layers on and off.

    One user or at one workstation that the user is using? If the user logs in at another workstation does everything work? I would first look at the browser on the users workstation then the network connections for errors or issues.

  3. #3
    Member
    Join Date
    2015-12
    Location
    Las Vegas, NV
    Posts
    20
    Login to Give a bone
    0

    Default Re: Toggle layers on and off.

    Thanks for the help. The User has dual monitors and on the second monitor. For some reason the toggles are locked for some reason??? If the window is on the first monitor it works fine. I know of three Users of many with this issue.

    Thanks again

  4. #4
    Member
    Join Date
    2003-04
    Posts
    2
    Login to Give a bone
    0

    Default Re: Toggle layers on and off.

    This is something snarky with the MapGuide 6.x activex module. I have several peicese of software besides the mapguide viewer that perform differently depending on which monitor they're on.

    As the admin for our County's GIS server I tell people they have one of 2 choices because autodesk has not updated the drivers in 3+ years. The choices are:
    1 - Pull the browser window to the main monitor
    2 - Oddly enough, the layer boxes can be toggled via the spacebar on the 2nd monitor when the rodent doesn't want to work.

    Regards,

    Tom

  5. #5
    Geospatial Moderator Jmurphy's Avatar
    Join Date
    2000-11
    Location
    TN/KY Area
    Posts
    1,640
    Login to Give a bone
    0

    Default Re: Toggle layers on and off.

    Quote Originally Posted by thoman View Post
    This is something snarky with the MapGuide 6.x activex module.

    Tom
    MapGuide 6.x...... Have you thought about upgrading? Even the Open Source Map Guide would be a bit bettter and supported my lots of folks.

  6. #6
    Member
    Join Date
    2003-04
    Posts
    2
    Login to Give a bone
    0

    Default Re: Toggle layers on and off.

    Working on it. Upgrading from 6.x that is. MGE 2011 still has stability and performance issues but I might have to put it out there anyway.

    My stability issues seem to revolve around the license component of MGE. After being operational for 2 months the license manager became inoperational after installing the most recent set of MS updates. Hand to completely uninstall and reinstal all MGE components to correct. I would drop back to MGOS but non-native support for mrSID imagery keeps me from that area.

    Performance is a completely different issue. MG 6.x does circles around MGE in the raster dept in my opinion.

    Tom

Similar Threads

  1. Toggle Layers on/off from menu toolbar
    By tlove2012.153153 in forum AutoLISP
    Replies: 2
    Last Post: 2007-11-13, 04:15 PM
  2. Managing Layers, unable to purge / remove Layers
    By asenbauer in forum AutoCAD General
    Replies: 3
    Last Post: 2006-11-10, 09:50 AM
  3. Replies: 3
    Last Post: 2006-09-22, 08:22 PM
  4. Replies: 3
    Last Post: 2006-07-19, 06:11 PM
  5. Slope Defining Toggle should act like Constrain Toggle
    By gregcashen in forum Revit Architecture - Wish List
    Replies: 0
    Last Post: 2004-01-15, 10:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •