I have to do some re-circuiting of my lights. When I edit the circuit of some lights, the wires connected to the lights do not update to the new circuit. So the home-run arrows now show 2 circuits. I have even tried to delete all the wires are do both the automated wiring with TAB+select, Convert to Wires, or manually adding wires myself. In either case, some wires get updated and some don't. Some home-run wires loose their arrows because they loose the circuit.
Any way to update wires after changing circuits. Any specific way I should be doing the re-circuiting. My method was to select the items I needed to re-circuit, disconnect panel, edit circuit, remove from circuit, select panel. This would create a new circuit from the next available breaker as expected.