I would be very grateful if you could please look at the attached drawing and advise on how my trouble has come about so I can avoid it in the future.
Attached is a drawing that i have started to produce and am adding to this drawing a number of multileaders. All was fine when I was working on it yesterday, when I opened it this morning it is behaving strangely.
The multileader on the drawing has a custom arrow head, created by myself. The first multi leader (bottom of drawing) was drawn from scratch and the other 15 were copied and edited. The Annotative scale was 1:50 when the leader was created.
This morning with the scale set to 1:50 they all appear to be stacked on top of each other. Change the scale to anything else and they appear in the correct place, but still at the size you would expect at 1:50, they don't get larger or smaller. Change back to 1:50 and the all appear stacked again. If you select one with cycle selection on, it lists all 16. Set at 1:50 you can't appear to change the scale in properties.
Now I can put this right by doing the following
Set Annotative scale to anything but 1:50
select all the Multileaders
Set Annotative to No in properties.
Set annotative back to yes in properties ( the scale changes to the new scale)
Add 1:50 as a new scale in annotative scale in properties and delete the current scale
In the model turn scale back to 1:50
Arrow head and text size need setting back to correct height.
All now appear fine.
I hope this all makes sense.
Very puzzled as to why this has happened and would like to avoid it happening again.
Anybody have any ideas as to why this happened and what I may have done wrong, I suspect it is either a glitch or something to do with the copying of a multileader with a custom arrow head.
Thanks all, your time and help would very much appreciated.