Results 1 to 6 of 6

Thread: Revit Long Radius Elbow - Welded - Generic

  1. #1
    Woo! Hoo! my 1st post
    Join Date
    2012-08
    Posts
    1


    Default Revit Long Radius Elbow - Welded - Generic

    Long Radius Pipe Elbow. Save the .XLS file as a .CSV file and put it with all the other files here: C:\ProgramData\Autodesk\RVT 2013\Lookup Tables\Pipe

    Website wouldnt load .CSV files??

    Then just load the family. Should work. Should have been included with the program from Autodesk.

    Send feedback if you have any suggestions, etc.
    Attached Files Attached Files

  2. #2
    Woo! Hoo! my 1st post
    Join Date
    2012-05
    Posts
    1


    Default Re: Revit Long Radius Elbow - Welded - Generic

    I couldn't open in revit 2012. =/

  3. #3
    Member
    Join Date
    2005-09
    Location
    Kalamazoo, MI
    Posts
    4


    Default Re: Revit Long Radius Elbow - Welded - Generic

    Worked wonderful - thanks!
    LD

  4. #4
    Woo! Hoo! my 1st post
    Join Date
    2013-10
    Posts
    1


    Default Re: Revit Long Radius Elbow - Welded - Generic

    windows 7 does not allow me to change the file type, as far as i can see. i can change the name, but not the type.
    sorry, i figured it out. and it works great.
    Last edited by mvincent223233; 2013-11-18 at 08:54 PM.

  5. #5


    Default Re: Revit Long Radius Elbow - Welded - Generic

    I loaded that elbow and now I'm getting the message where it can't find the Lookup Table.

    I added your Lookup Table to the spot on my C: directory where the others are. I also dragged and dropped it into the drawing. Still nothing. Any attempt at using this elbow that you shared makes it get small and give me the message.

  6. #6


    Default Re: Revit Long Radius Elbow - Welded - Generic

    I have loaded this family and lookup table. It still gives me the error saying the lookup table isn't there while rendering a tiny elbow in place.

Similar Threads

  1. 2014: Customize Radius Elbow for Ductwork
    By rcsan85400224 in forum AMEP General
    Replies: 0
    Last Post: 2014-10-31, 04:10 PM
  2. MEP Conduit Elbow Radius
    By Burns.229583 in forum AMEP General
    Replies: 0
    Last Post: 2010-01-14, 01:45 PM
  3. RADIUS ELBOW (HVAC DUCTWORK LSP)
    By CAD Brad in forum AutoLISP
    Replies: 11
    Last Post: 2008-08-11, 02:09 AM
  4. Pipework-ANSI socket welded 90 degree elbow
    By landy90 in forum Dynamic Blocks - Sharing
    Replies: 0
    Last Post: 2008-03-22, 03:21 PM
  5. Pipework-ANSI socket welded 45 degree elbow
    By landy90 in forum Dynamic Blocks - Sharing
    Replies: 0
    Last Post: 2008-03-22, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •