Revit Long Radius Elbow - Welded - Generic

[jkrack890740]

Long Radius Pipe Elbow. Save the .XLS file as a .CSV file and put it with all the other files here: C:\ProgramData\Autodesk\RVT 2013\Lookup Tables\Pipe

Website wouldnt load .CSV files??

Then just load the family. Should work. Should have been included with the program from Autodesk.

Send feedback if you have any suggestions, etc.

[bsouzab940010]

I couldn't open in revit 2012. =/

[ldrago]

Worked wonderful - thanks!
LD

[mvincent223233]

windows 7 does not allow me to change the file type, as far as i can see. i can change the name, but not the type.
sorry, i figured it out. and it works great.

[Michael @ Tappouni]

I loaded that elbow and now I'm getting the message where it can't find the Lookup Table.

I added your Lookup Table to the spot on my C: directory where the others are. I also dragged and dropped it into the drawing. Still nothing. Any attempt at using this elbow that you shared makes it get small and give me the message.

[Michael @ Tappouni]

I have loaded this family and lookup table. It still gives me the error saying the lookup table isn't there while rendering a tiny elbow in place.

[hardin]

This works fine for 90 deg elbows, but does not work well for 45s or other angles.