Results 1 to 10 of 10

Thread: Footings that Intersect

  1. #1
    100 Club
    Join Date
    2004-08
    Location
    Beaverton, Or.
    Posts
    126
    0 Did you find this post helpful? Yes

    Default Footings that Intersect

    I have footings set to show up as hidden lines on plan in the view settings and that works fine. But, when ever footings of different thicknesses intersect it messes up the lines that are displayed on the plans, turning some hidden lines solid and others just look like smaller dashes. As long as they are the same then nothing is wrong.

    How can I prevent this from happening? (Other then making all footings the same thickness)

    The same thickness
    FOOTING INTERSECTION2.JPG

    Different
    FOOTING INTERSECTION.JPG
    Last edited by clintonc; 2013-03-05 at 12:43 AM.

  2. #2
    100 Club
    Join Date
    2008-06
    Location
    Denver, CO
    Posts
    160
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    I think what you're seeing is the two dashed lines overlapping. If they are different lengths than they fill in each others gaps, so to speak.
    Last edited by rtaube; 2013-03-05 at 04:06 PM. Reason: spelling
    Ryan Taube LEED AP
    ___________________

  3. #3
    100 Club
    Join Date
    2004-08
    Location
    Beaverton, Or.
    Posts
    126
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    But where are the 2nd dashed lines coming from? There is no footing above or below the footings. If they are the dashed line representing the bottom edge of the footing do you know of a way to hide them?

  4. #4
    100 Club
    Join Date
    2008-06
    Location
    Denver, CO
    Posts
    160
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    I would play around with the Linework tool <Invisible Line> as well as hiding an element in view, just make sure it's just one element. I believe that yes, if the top and bottom of the footing is different lengths, the dashed lines will screw up this way.
    Ryan Taube LEED AP
    ___________________

  5. #5
    Member
    Join Date
    2008-12
    Location
    Tulsa, Oklahoma
    Posts
    15
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    Have you joined the two footings? You might be seeing the two edges of the two footings. Sometimes auto joint works fine, but other times I find that I need to get in and actually join the footings together.

  6. #6
    100 Club
    Join Date
    2004-08
    Location
    Beaverton, Or.
    Posts
    126
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    Yes, I have. It seems that to happen when the footings are a different thickness. If I make them the same thickness it makes the problem go away, which makes making a accurate model that also looks good difficult.

  7. #7
    Active Member
    Join Date
    2009-08
    Posts
    77
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    The Revit philosophy: Massive amount of display settings, limited amount of display control.

  8. #8
    100 Club
    Join Date
    2004-08
    Location
    Beaverton, Or.
    Posts
    126
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    You nailed it...

  9. #9
    Super Moderator david_peterson's Avatar
    Join Date
    2002-09
    Location
    Madison, WI
    Posts
    4,767
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    You could try setting the foundations to be a hidden line, then uncheck the 'hidden lines" options.
    In theory that might fix the problem.
    But most times, revit is going to draw line if you have 2 different thickness.
    Dave Peterson

    Acad 2014 - Revit Structure 2013 & 2014 - Win 7 64 - i7-4770 4.5GHz 32GB Ram - Nvidia Geforce GTX 650
    "The more you know, the less you know, because the more you know you don't know". --M. Lin

  10. #10
    100 Club
    Join Date
    2004-08
    Location
    Beaverton, Or.
    Posts
    126
    0 Did you find this post helpful? Yes

    Default Re: Footings that Intersect

    That is an interesting idea. I will try it.

Similar Threads

  1. Toposurface wall intersect
    By dznr27 in forum Revit Architecture - General
    Replies: 1
    Last Post: 2011-06-09, 09:55 PM
  2. IntersectWith says lines don't intersect
    By bsardeson in forum VBA/COM Interop
    Replies: 3
    Last Post: 2010-08-23, 08:09 PM
  3. curve intersect result
    By sfaust in forum Revit - API
    Replies: 9
    Last Post: 2009-04-28, 03:19 PM
  4. No sideslope intersect found
    By benavlr in forum Español - AutoCAD Civil 3D
    Replies: 3
    Last Post: 2009-01-16, 06:15 PM
  5. Intersect Geometry
    By nsinha73 in forum Revit Architecture - General
    Replies: 1
    Last Post: 2006-11-28, 04:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •