Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: How do I fillet, chamfer, and dimension in isometric?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    2013-07
    Location
    Perth, Western Australia
    Posts
    34
    Login to Give a bone
    0

    Default How do I fillet, chamfer, and dimension in isometric?

    That's it, really. I can draw block thingy's in isometric, and I can even simulate circles with ellipses. However, three things elude me in isometric: chamfer, fillet, and dimensioning. I can't find anything useful in on-line tutorials. Can someone please help? Thanks

  2. #2
    Certified AUGI Addict cadtag's Avatar
    Join Date
    2000-12
    Location
    Cairo - no, not Illinois
    Posts
    5,069
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    To clarify, you are asking about isometric drafting? not an isometric view of a 3d space?

    If that's the case, then a fillet rould need to be an isocircle (ellipse) that's trimmed backto the lines. and the lines trimmed back to the isocircle. Chamfering you'll need to lay out by hand, eg measure back on each plane the chamfer distance, and draw the chamfer lines in.

    Dimensioning just takes defining an appropriate style -- a couple of nice samples have been posted here in the past.

    I don't expect that any CAD program will provide better tools to do isometric drafting, (or cabinet projection, or cavilier projection either). Doing 3D is where the trendiness is. About the only place that isometrics have in CAD is as riser diagrams,,,,,

  3. #3
    Member
    Join Date
    2013-08
    Location
    San Diego
    Posts
    4
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    I'm definitely a novice in Autocad but I use a .lsp routine for my isometric views. All my drawings are in 2D, no 3D stuff.

    Gene

  4. #4
    Certified AUGI Addict cadtag's Avatar
    Join Date
    2000-12
    Location
    Cairo - no, not Illinois
    Posts
    5,069
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    Quote Originally Posted by easymike29412754 View Post
    I'm definitely a novice in Autocad but I use a .lsp routine for my isometric views. All my drawings are in 2D, no 3D stuff.

    Gene
    Not sure if you realize, but the SNAP command has a style option that will simplify isometric drafting, setting the crossharis at the correct andgles for isometric, and making it easy to toggle thru the isometric 'planes' by tapping F5, When Snapstyle is set to Iso, the ellipse command automagically offers an option for an isocircle on the current plane.

  5. #5
    Member
    Join Date
    2013-08
    Location
    San Diego
    Posts
    4
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    Quote Originally Posted by cadtag View Post
    Not sure if you realize, but the SNAP command has a style option that will simplify isometric drafting, setting the crossharis at the correct andgles for isometric, and making it easy to toggle thru the isometric 'planes' by tapping F5, When Snapstyle is set to Iso, the ellipse command automagically offers an option for an isocircle on the current plane.
    Heh, heh. Thanks for the info but I'm still using Autocad for DOS.

    Gene

  6. #6
    Geospatial Moderator Jmurphy's Avatar
    Join Date
    2000-11
    Location
    TN/KY Area
    Posts
    1,640
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    Quote Originally Posted by easymike29412754 View Post
    Heh, heh. Thanks for the info but I'm still using Autocad for DOS.

    Gene
    What version of AutoCAD are you using and it is AutoCAD LT or Full AutoCAD?

  7. #7
    Member
    Join Date
    2013-07
    Location
    Perth, Western Australia
    Posts
    34
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    [QUOTE=cadtag;1241919]
    Dimensioning just takes defining an appropriate style -- a couple of nice samples have been posted here in the past.
    [QUOTE]

    Thanks for the answer, Cadtag. I was scared you would say that. It seems I am doomed to be a bit old-fashioned!

    However, others have casually mentioned that " ... dimensioning just takes defining an appropriate style ... ". No-one yet has given me any indication as to how to do that. I have no idea what you are talking about. Would you please explain in more detail?

    Thanks

  8. #8
    All AUGI, all the time
    Join Date
    2016-02
    Location
    Sydney, Australia
    Posts
    512
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    Draw in plan view, then change the view to iso metric. Then save the view as a WMF & import that file with WMFIN command. Dimension to your style preference. I would change the end tick angles, and incline the text.

  9. #9
    Certified AUGI Addict jaberwok's Avatar
    Join Date
    2000-12
    Location
    0,0,0 The Origin
    Posts
    8,570
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    This thread should help - also, cadtag's post #5 applies equally to DOS and Windoze versions.

  10. #10
    Certified AUGI Addict cadtag's Avatar
    Join Date
    2000-12
    Location
    Cairo - no, not Illinois
    Posts
    5,069
    Login to Give a bone
    0

    Default Re: How do I fillet, chamfer, and dimension in isometric?

    I exported Richard.Kent's example to R12 DXF, hopefully that will help. unzip the file, then run dxfin to creaet a drawing from it.


    DOS? wow - that's going back a ways. Though I do still have a set of IBM DOS 4.something still in shrinkwrap. I bet that would scream on a i7 chipset and SSD drive.
    Attached Files Attached Files

Page 1 of 2 12 LastLast

Similar Threads

  1. 3d fillet / chamfer tool
    By Wish List System in forum Revit Architecture - Wish List
    Replies: 1
    Last Post: 2012-07-16, 04:58 PM
  2. Fillet and Chamfer
    By BCrouse in forum ACA General
    Replies: 15
    Last Post: 2008-05-16, 12:26 PM
  3. Fillet and Chamfer!
    By rsmannino in forum Revit Architecture - Wish List
    Replies: 1
    Last Post: 2006-12-08, 12:50 AM
  4. Crossing window for fillet and chamfer
    By autocad.wishlist1734 in forum AutoCAD Wish List
    Replies: 0
    Last Post: 2006-03-13, 01:26 AM
  5. fillet/chamfer non-coplaner lines
    By autocad.wishlist1734 in forum AutoCAD Wish List
    Replies: 0
    Last Post: 2006-01-07, 12:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •