See the top rated post in this thread. Click here

Results 1 to 8 of 8

Thread: Window opening marker

  1. #1
    Active Member
    Join Date
    2013-04
    Posts
    51
    Login to Give a bone
    0

    Default Window opening marker

    Hi, I have adapted a stacking sliding door to use as a window. I downloaded the door from a website. I can't work out how to move or turn off the opening direction markers that are now in the wrong position as shown in the attached photo. Any ideas?
    Attached Images Attached Images

  2. #2
    AUGI Addict
    Join Date
    2015-11
    Location
    Madison, WI
    Posts
    1,318
    Login to Give a bone
    1

    Default Re: Window opening marker

    Scott,

    Are these coming from the family? If so, that is where you go. Could you possibly upload your family?

    Cheers,
    Jeff S.

  3. #3
    Active Member
    Join Date
    2013-04
    Posts
    51
    Login to Give a bone
    0

    Default Re: Window opening marker

    Thanks Jeff, I have tried to fix the issue in "edit family', if this is what you mean, but there is no sign of the markers being there at all. Also Im not sure what you mean by 'Could you possibly upload your family?' Do you mean to 'load into project', after fixing the problem in edit?

    Cheers

    Scotty

  4. #4
    I could stop if I wanted to
    Join Date
    2010-10
    Location
    Chicago, IL
    Posts
    376
    Login to Give a bone
    1

    Default Re: Window opening marker

    Quote Originally Posted by scottyermer View Post
    Also Im not sure what you mean by 'Could you possibly upload your family?' Do you mean to 'load into project', after fixing the problem in edit?
    Upload the family here (forum), so we can take a look at it, and look for the issue.

  5. #5
    AUGI Addict
    Join Date
    2015-11
    Location
    Madison, WI
    Posts
    1,318
    Login to Give a bone
    1

    Default Re: Window opening marker

    These are probably symbolic lines, and they will therefore only show up in elevation. If you were looking for it in 3D or plan views you would not have seen them. Otherwise, they might be on a subcategory that is turned off in the family editor.

    Give those a try and report back to us what you find.

    Thanks,
    Jeff S.

  6. #6
    Active Member
    Join Date
    2013-04
    Posts
    51
    Login to Give a bone
    0

    Default Re: Window opening marker

    Sorry, But can you give me a quick instruction on how to upload the family onto to the forum.

    Cheers

  7. #7
    Active Member
    Join Date
    2013-04
    Posts
    51
    Login to Give a bone
    0

    Default Re: Window opening marker

    I have gone into every subcategory in the family editor to try and turn them off without any success.

  8. #8
    I could stop if I wanted to
    Join Date
    2010-10
    Location
    Chicago, IL
    Posts
    376
    Login to Give a bone
    0

    Default Re: Window opening marker

    Quote Originally Posted by scottyermer View Post
    Sorry, But can you give me a quick instruction on how to upload the family onto to the forum.
    Please read this.

Similar Threads

  1. Window Rough Opening
    By noah in forum Revit Architecture - Families
    Replies: 9
    Last Post: 2010-06-25, 08:16 AM
  2. Window Opening
    By rocks-e in forum Revit Architecture - General
    Replies: 1
    Last Post: 2009-12-16, 09:24 PM
  3. hiding window removes the opening for the window as well
    By JH75 in forum Revit Structure - General
    Replies: 4
    Last Post: 2008-09-15, 10:09 PM
  4. Replies: 2
    Last Post: 2007-05-21, 05:50 PM
  5. ADT opening window screen
    By rhayes.99001 in forum ACA General
    Replies: 1
    Last Post: 2007-01-31, 08:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •