Results 1 to 4 of 4

Thread: levee assembly

  1. #1
    All AUGI, all the time
    Join Date
    2004-06
    Location
    Slidell, Louisiana
    Posts
    968
    Login to Give a bone
    0

    Default levee assembly

    what would be the best way to create an assembly for a levee?

  2. #2
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,089
    Login to Give a bone
    0

    Default Re: levee assembly

    How does your section look? Have you used Subassembly Composer?
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

  3. #3
    All AUGI, all the time
    Join Date
    2004-06
    Location
    Slidell, Louisiana
    Posts
    968
    Login to Give a bone
    0

    Default Re: levee assembly

    no experience with Subassembly Composer. it's a basic one, 10' wide top, with a 2:1 slope down to a certain elevation on one side and a 3:1 slope down to existing ground on the other.
    i thought about using some Generic subassemblys, like link slope to elevation and link slope to surface with link offset and slope for the top, but wan't sure if that would be the best way.
    Last edited by rmk; 2020-07-22 at 01:04 PM.

  4. #4
    Administrator Opie's Avatar
    Join Date
    2002-01
    Location
    jUSt Here (a lot)
    Posts
    9,089
    Login to Give a bone
    0

    Default Re: levee assembly

    That should work. I've done similar using the generic subassemblies.
    If you have a technical question, please find the appropriate forum and ask it there.
    You will get a quicker response from your fellow AUGI members than if you sent it to me via a PM or email.
    jUSt

Similar Threads

  1. 2017: animated assembly in assembly
    By JWB1474 in forum Inventor - General
    Replies: 4
    Last Post: 2017-05-28, 04:43 PM
  2. CV430-1: Leveraging Levee Design Using Corridors in AutoCAD® Civil 3D® 2011
    By Autodesk University in forum Civil Infrastructure
    Replies: 0
    Last Post: 2015-08-07, 05:23 PM
  3. Replies: 1
    Last Post: 2012-05-28, 04:58 PM
  4. Replies: 1
    Last Post: 2012-05-28, 04:56 PM
  5. Assembly Plant Filter-Regulator-Lubricator Assembly
    By dcbenson001 in forum AutoCAD Gallery
    Replies: 4
    Last Post: 2005-06-14, 01:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •