AutoCad 2012, 2013, 2014 LT device not certified quadro K600
Hi, i just bought Nvidia videocard that autodesk certified quadro K600, and i tried installing all kind of drivers even new ones and old ones, certified ones.. in 3DCONFIG it still shows up as: Your machine contains a 3D Device that is not certified.
here is the driver that autodesk listed but it doesnt work:
my system:
16gb of ram
win7 64bit
i5
Please help me with this problem..Code:CPU-Z TXT Report ------------------------------------------------------------------------- Binaries ------------------------------------------------------------------------- CPU-Z version 1.70.0.x64 Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 4 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 2 -- Core 2 -- Thread 0 4 -- Core 3 -- Thread 0 6 Timers ------------------------------------------------------------------------- ACPI timer 3.580 MHz HPET timer 14.318 MHz Perf timer 3.125 MHz Sys timer 1.000 KHz Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 4 (max 8) Number of threads 4 (max 16) Name Intel Core i5 3470 Codename Ivy Bridge Specification Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz Package (platform ID) Socket 1155 LGA (0x1) CPUID 6.A.9 Extended CPUID 6.3A Core Stepping N0 Technology 22 nm TDP Limit 77 Watts Tjmax 105.0 °C Core Speed 1699.6 MHz Multiplier x Bus Speed 17.0 x 100.0 MHz Stock frequency 3200 MHz Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x, AES, AVX L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size L1 Instruction cache 4 x 32 KBytes, 8-way set associative, 64-byte line size L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size L3 cache 6 MBytes, 12-way set associative, 64-byte line size FID/VID Control yes Turbo Mode supported, enabled Max non-turbo ratio 32x Max turbo ratio 36x Max efficiency ratio 16x Min Power 60 Watts O/C bins +4 Ratio 1 core 36x Ratio 2 cores 36x Ratio 3 cores 35x Ratio 4 cores 34x TSC 3200.1 MHz APERF 3420.4 MHz MPERF 3144.7 MHz Chipset ------------------------------------------------------------------------- Northbridge Intel Ivy Bridge rev. 09 Southbridge Intel H77 rev. 04 Graphic Interface PCI-Express PCI-E Link Width x16 PCI-E Max Link Width x16 Memory Type DDR3 Memory Size 16 GBytes Channels Dual Memory Frequency 666.5 MHz (1:5) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Command Rate (CR) 1T MCHBAR I/O Base address 0x0FED10000 MCHBAR I/O Size 19456 MCHBAR registers Memory SPD ------------------------------------------------------------------------- DIMM # 1 SMBus address 0x50 Memory type DDR3 Module format UDIMM Manufacturer (ID) Kingston (7F980000000000000000) Size 8192 MBytes Max bandwidth PC3-10700 (667 MHz) Part number KHX1600C10D3/8GX Serial number 72253903 Manufacturing date Week 38/Year 13 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.3 AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-30 @ 609 MHz JEDEC #4 9.0-9-9-24-33 @ 666 MHz XMP profile XMP-1600 Specification PC3-12800 Voltage level 1.500 Volts Min Cycle time 1.250 ns (800 MHz) Max CL 10.0 Min tRP 12.50 ns Min tRCD 12.50 ns Min tWR 15.00 ns Min tRAS 33.75 ns Min tRC 45.00 ns Min tRFC 260.00 ns Min tRTP 7.50 ns Min tRRD 6.00 ns XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-7-7-17-22-n.a @ 480 MHz (1.500 Volts) XMP #2 7.0-7-7-19-26-n.a @ 560 MHz (1.500 Volts) XMP #3 8.0-8-8-22-29-n.a @ 640 MHz (1.500 Volts) XMP #4 9.0-9-9-25-33-n.a @ 720 MHz (1.500 Volts) DIMM # 2 SMBus address 0x52 Memory type DDR3 Module format UDIMM Manufacturer (ID) Kingston (7F980000000000000000) Size 8192 MBytes Max bandwidth PC3-10700 (667 MHz) Part number KHX1600C10D3/8GX Serial number 78256003 Manufacturing date Week 38/Year 13 Number of banks 8 Nominal Voltage 1.50 Volts EPP no XMP yes XMP revision 1.3 AMP no JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency JEDEC #1 6.0-6-6-17-23 @ 457 MHz JEDEC #2 7.0-7-7-20-27 @ 533 MHz JEDEC #3 8.0-8-8-22-30 @ 609 MHz JEDEC #4 9.0-9-9-24-33 @ 666 MHz XMP profile XMP-1600 Specification PC3-12800 Voltage level 1.500 Volts Min Cycle time 1.250 ns (800 MHz) Max CL 10.0 Min tRP 12.50 ns Min tRCD 12.50 ns Min tWR 15.00 ns Min tRAS 33.75 ns Min tRC 45.00 ns Min tRFC 260.00 ns Min tRTP 7.50 ns Min tRRD 6.00 ns XMP timings table CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage) XMP #1 6.0-7-7-17-22-n.a @ 480 MHz (1.500 Volts) XMP #2 7.0-7-7-19-26-n.a @ 560 MHz (1.500 Volts) XMP #3 8.0-8-8-22-29-n.a @ 640 MHz (1.500 Volts) XMP #4 9.0-9-9-25-33-n.a @ 720 MHz (1.500 Volts)
I tried it on autocad 2012 LT 2013LT and 2014LT
Here is the tuner log:
Code:Performance Tuner Results Log Version: 19.0.2.00 Date of Last Tune: 2016.02.02. Machine Configuration --------------------- Processor Speed : 3.2 GHz RAM : 16327 MB 3D Device --------- Name : NVIDIA Quadro K600 Manufacturer : NVIDIA Chip set : Quadro K600 Memory : 688 MB Driver : 9.18.0013.4052 Your machine contains a 3D Device that is not certified. As more graphics cards and 3D display drivers are tested, they are added to a list on the Autodesk website. You can check for updates and download the latest certification list at any time. Run the 3DCONFIG command and click the Check for Updates button. Current application driver: acaddm10.hdi Current Effect Status: ---------------------- Enhanced 3D Performance: Available and on Smooth display: Not available Gooch shader: Software emulation in use Per-pixel lighting: Not available Full-shadow display: Not available Texture compression: Not available Advanced material effects: Not available Available application drivers and effect support: ------------------------------------------------- Software driver Effect support: Enhanced 3D Performance: Not applicable Smooth display: Not applicable Gooch shader: Software emulation only Per-pixel lighting: Not applicable Full-shadow display: Not applicable Texture compression: Not applicable Advanced material effects: Not applicable Autodesk driver: Not Certified Effect support: Enhanced 3D Performance: Available Smooth display: Not available Gooch shader: Software emulation only Per-pixel lighting: Not available Full-shadow display: Not available Texture compression: Not available Advanced material effects: Not available
Reply With Quote
Originally Posted by rkmcswain
