Results 1 to 3 of 3

Thread: Components do not print to PDF consistently

  1. #1
    Member
    Join Date
    2016-06
    Posts
    3
    Login to Give a bone
    0

    Default Components do not print to PDF consistently

    We have a view that won't show all the furniture in PDf, even though it all shows on screen.
    It is a segmented plan, the PDF of the North 1/2 doesn't work but the PDF of the South half does. This only happens on one floor out four, the rest works fine.
    Everything is controlled in View templates , which are the same on all views of this type.
    I've switch the scope box for the crop region, no change.
    Recreated the view, again no change.
    The only thing that seems to work is if I resize the crop region to include an additional 6500mm of the south view it works, any less and it doesn't.
    I can't find anything in that area that has an impact.

    Any suggestions?

    Thanks

  2. #2
    Super Moderator david_peterson's Avatar
    Join Date
    2002-09
    Location
    Madison, WI
    Posts
    5,687
    Login to Give a bone
    0

    Default Re: Components do not print to PDF consistently

    Try printing as Raster instead of Vector.
    Also if the crop region has anything "Crops" that aren't 90 degree angles, you're going to have issues trying to create the pdf.
    Just my thoughts.

  3. #3
    Member
    Join Date
    2016-07
    Posts
    2
    Login to Give a bone
    0

    Default Re: Components do not print to PDF consistently

    I have a similar issue when printing from print dialogue using the Print Range selected views/sheets. All walls are tagged on multiple floors yet only a few of them show when printed. It happens when sending to PDF or to the Plotter, and only when using the selected views/sheets dialogue.

Similar Threads

  1. Consistently deploying a standard profile
    By mpeterson79 in forum CAD Management - General
    Replies: 11
    Last Post: 2010-09-16, 12:11 PM
  2. Colored lines not plotting consistently
    By dduarte in forum Revit - Plotting/Printing/Exporting
    Replies: 1
    Last Post: 2007-03-20, 12:25 PM
  3. Building 9.1 will not consistently get network licenses
    By johnstory70451 in forum Revit Architecture - General
    Replies: 1
    Last Post: 2006-10-24, 04:39 PM
  4. Snap Overrides not working consistently
    By J. Grouchy in forum Revit Architecture - General
    Replies: 0
    Last Post: 2005-06-06, 03:15 PM
  5. Components disappearing when I print
    By szechuan3 in forum Revit Architecture - Families
    Replies: 2
    Last Post: 2004-03-22, 11:30 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •