Results 1 to 4 of 4

Thread: Clash Detection Completion Documentation

  1. #1
    I could stop if I wanted to
    Join Date
    2003-08
    Location
    Tijuana
    Posts
    225
    Login to Give a bone
    0

    Default Clash Detection Completion Documentation

    Hi,

    I'd like to ask how design teams are documenting the completion of clash detection, to communicate to the owner that this has been done, and make it formal. Delivery method is design-bid-build. In our case, there are negligible clashes that still come out in the clash reports.

    Thanks,

  2. #2
    100 Club a_meteni's Avatar
    Join Date
    2002-12
    Location
    Cairo
    Posts
    174
    Login to Give a bone
    0

    Default Re: Clash Detection Completion Documentation

    After the clash reports received from our BIM coordinator, each discipline begins solving its related clashes and once completed, we document the process via the clash detection checklists that are filled/signed by all disciplines at the end of each stage. communicating any of these documents to the owner is not in our work flow. After all we submit the model(s) at the end of the design phase that are “almost” free of hard clashes

  3. #3
    I could stop if I wanted to
    Join Date
    2003-08
    Location
    Tijuana
    Posts
    225
    Login to Give a bone
    0

    Default Re: Clash Detection Completion Documentation

    Thanks Ali

  4. #4
    Woo! Hoo! my 1st post
    Join Date
    2018-09
    Posts
    1
    Login to Give a bone
    0

    Default Re: Clash Detection Completion Documentation

    Carlos,

    we have a requirement for the contractors to red-pen markup all installation deviations from the Approved design & submit their own AsBuilt drawing set upon completion. It's a matter of trust that that's done honestly (& for the most part works). As for the clash detection, the report is issued to design teams for coordination prior to the issue of Construction Drawings, so.... you could pass those onto the client.

Similar Threads

  1. Clash Detection Groupings
    By Wish List System in forum NavisWorks - Wish List
    Replies: 0
    Last Post: 2012-05-25, 03:33 PM
  2. Clash Detection
    By brian.elbe in forum NavisWorks - General
    Replies: 1
    Last Post: 2010-09-28, 08:45 PM
  3. What is clash detection?
    By volker.joseph in forum NavisWorks - General
    Replies: 0
    Last Post: 2009-05-19, 02:36 PM
  4. ABS clash detection?
    By peter.rumpf in forum AMEP General
    Replies: 4
    Last Post: 2006-02-01, 02:37 PM
  5. clash detection?
    By peter.rumpf in forum Revit Architecture - General
    Replies: 1
    Last Post: 2006-01-18, 05:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •