UV mapping problem in Revit. Help Please

[Bijan-Naveh]

Hi guys,

I have a problem with the way texture appears on wall sweeps. It seems the texture repeats the same way on each wall sweep make the final render aweful. Apart from my own solution (exporting the whole wall sweeps to another app (e.g Sketchup) and then reimport it as a unit solid which makes it impossible to apply any further changes to the wall sweep shapes) is there any way to address the issue inside Revit?
Picture is attached.

Thanks in advance
Capture2.JPG

[david_peterson]

Adjust the material center for each sweep.

[Bijan-Naveh]

Adjust the material center for each sweep.

You mean I have to creat a seprate material for each sweep?

[Bijan-Naveh]

If you meant that, I tried but changing material of one sweep applies to all automatically. Please notice they are same type sweeps.I tried to apply a new material to one of them but received that new material. Would you please elaborate?

[david_peterson]

Ok so those are individual wall sweeps correct. ie not in-place sweeps.
Assuming the first then that's the result I would expect as the material is applied to type.
You could make new types with new materials. You could also try the paint tool, but I'm not sure that'll work much better.