See the top rated post in this thread. Click here

Results 1 to 2 of 2

Thread: Revit - sloped floor in curves

  1. #1
    Login to Give a bone
    0

    Default Revit - sloped floor in curves

    HI,

    i'm trying to get a floor in an smooth slope for a underground garage, now the floor edges has curves in it.
    i know i can get a floor in a round shape but not the shape i need. and with modyfing sub elements i don't get a smooth sufrace.

    anybody knows how to get a smooth surface?

    thx

    see attachements for the shape
    Attached Images Attached Images

  2. #2
    Super Moderator david_peterson's Avatar
    Join Date
    2002-09
    Location
    Madison, WI
    Posts
    5,539
    Login to Give a bone
    1

    Default Re: Revit - sloped floor in curves

    Not sure what you're actually trying to achieve (I don't know where the highs and lows are supposed to be), but one hack I've seen was to draw the slab with straight lines or make it a rectangle and then used an In-Place Void Mass to cut out the curve.
    I've seen this done a lot on Roofs where you know where the low spot is, you know where you want the ridge line and you don't care where the highpoint really is (it's tapered insulation, it all tapers at the same slope) so you'd draw a square, set the low point by modifying the sub elements, and then cut out the perimeter with an In-Place void.
    Hopefully this helps.
    Dave Peterson
    BIM Coordinator

    Acad - 2016 - Revit 2019 w/ A360 - Navisworks - 3ds 2019 - Ensacpe - Lumion - Win 7 64 - i7-6700K 4.0GHz 32GB DDR4 Ram - Nvidia Quadro K2200
    "The more you know, the less you know, because the more you know you don't know". --M. Lin

Similar Threads

  1. Railing on sloped floor
    By kafka in forum Revit Architecture - General
    Replies: 20
    Last Post: 2015-12-09, 09:59 AM
  2. 2014: RAMP VS SLOPED FLOOR
    By rdooley944157 in forum Revit Architecture - General
    Replies: 2
    Last Post: 2013-11-21, 08:49 PM
  3. floor with sloped underside?
    By Limbatus in forum Revit Architecture - General
    Replies: 5
    Last Post: 2011-05-07, 06:59 AM
  4. Sloped layer in floor
    By rgranja508683 in forum Revit Architecture - General
    Replies: 3
    Last Post: 2004-12-17, 02:40 AM
  5. Sloped Floor
    By leslie smith in forum Revit Architecture - General
    Replies: 5
    Last Post: 2004-02-12, 07:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •