Results 1 to 5 of 5

Thread: Problem with room tags-schedule

  1. #1
    I could stop if I wanted to
    Join Date
    2003-08
    Location
    Tijuana
    Posts
    225
    Login to Give a bone
    0

    Default Problem with room tags-schedule

    The project has six existing untagged rooms, that show up on Room of the options bar while placing room tags. After I tag rooms using these untagged rooms, and I try to schedule them, the schedule appears blank. If I place new tags on other rooms they don't schedule either. The schedule doesn't have a filter or anything that could be preventing registers from showing.


    What could be preventing the schedule from showing properly?

    Thanks,
    Last edited by sifuentes; 2005-05-12 at 11:04 PM.

  2. #2
    Super Moderator beegee's Avatar
    Join Date
    2003-05
    Location
    crusing 11 kms above Australia
    Posts
    5,153
    Login to Give a bone
    0

    Default Re: Problem with room tags-schedule

    At some stage in the project you have deleted six room tags, but not the the rooms.

    When the tags were deleted, there would have been a warning message ...
    Room has no Room Tags. Physical properties such as area will display as "Not Tagged" in schedules. You can place a new Room Tag for this Room using the option bar in the Room Tag tool, or you can delete the Room in a schedule.
    The tags remain available for use, but may now be assigned to other new rooms. Say you had rooms numbered 1 to 4, you delete tags 2 & 3 and then tag the room that was number 3 with a new tag number 5. Your schedule will list rooms 1, 2, 4 and 5 correctly and will list a room 3 as " not tagged " To delete that number select the row in the schedule and click delete from the toolbar. Otherwise, you could filter the schedule if you wished.

  3. #3
    I could stop if I wanted to
    Join Date
    2003-08
    Location
    Tijuana
    Posts
    225
    Login to Give a bone
    0

    Default Re: Problem with room tags-schedule

    Thanks beegee.

    The main problem persists, and it is that not a single room tagged or not-tagged shows up on the schedule. I have deleted the old schedules, created new ones, deleted all room tags, purged the tag family and reloaded a room tag, and the room schedule won't work.

  4. #4
    Revit Founder LRaiz's Avatar
    Join Date
    2003-07
    Location
    Newton, MA
    Posts
    714
    Login to Give a bone
    0

    Default Re: Problem with room tags-schedule

    Did you check phasing properties of your rooms and your schedule?

  5. #5
    I could stop if I wanted to
    Join Date
    2003-08
    Location
    Tijuana
    Posts
    225
    Login to Give a bone
    0

    Default Re: Problem with room tags-schedule

    I just found out this was the problem. Thanks Leonid.

Similar Threads

  1. Room Schedule/ Tags/ Room-Advanced
    By bpaul in forum Revit Architecture - General
    Replies: 8
    Last Post: 2007-03-15, 01:45 PM
  2. Mysterious Room Tags Showing in Schedule?
    By photography67836 in forum Revit Architecture - General
    Replies: 6
    Last Post: 2005-05-05, 07:05 PM
  3. Room Schedule & Ceiling Tags
    By ihammerhands in forum Revit Architecture - General
    Replies: 6
    Last Post: 2005-05-04, 08:20 PM
  4. Room Schedule & Ceiling Tags
    By ihammerhands in forum Revit Architecture - General
    Replies: 4
    Last Post: 2004-06-25, 07:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •