Hi, I'm Bob,
I drew this in AutoCAD2002 and also used AutoCAD to render it.
this was done with eight Ceiling lights, eight under counter lights, four above the wall cabinet lights and four lights in the cabinets behind the glass.
fun!!
Hi, I'm Bob,
I drew this in AutoCAD2002 and also used AutoCAD to render it.
this was done with eight Ceiling lights, eight under counter lights, four above the wall cabinet lights and four lights in the cabinets behind the glass.
fun!!
looks cool!Originally Posted by drafter.88652
Did you do all of the cabinets and trim by hand, or were you able to use existing blocks for any of it?
Melanie Perry @MistresDorkness
Facilities CAD Management (FM - MEP/FP)
Technical Editor
Revit MEP 2013 Suitenot all who wander are lost
Are you sure this isn't a tutorial example? It's a good job.Originally Posted by drafter.88652
I like how the light plays of the surfaces. I also like the reflections in the oven door and the glass in the cabinets.
AutoCAD Civil3D 2013
Gig 'Em, Aggies!
Never attribute to malice that which can be adequately explained by stupidity, but don't rule out malice
Look great, I didn't know you could get a render like that straight out of AutoCAD. One thing, the pantry door would look nicer if it was a taller door to better match the height of the other cabinets or maybe some extra detail moulding over the door would do the trick.
Just my thoughts, great job!
Mike
thanks Melanie,
I am building my house soon and I drew the whole house in 3d. yes I did draw everything by hand. I work at Crystal Cabinets so this is my own design. I will have more photos coming.
thanks for the reply.
Bob
That is awesome!! Just wondering one thing - where's the sink??Originally Posted by drafter.88652
![]()
Awesome! Not only is the model neat, but, I really like the setup of the kitchen... everything nice and easily accessible... so, is the sink there on the left of that island, lowered from the stools' serving area?Originally Posted by drafter.88652
Melanie Perry @MistresDorkness
Facilities CAD Management (FM - MEP/FP)
Technical Editor
Revit MEP 2013 Suitenot all who wander are lost
Thanks Mike,
that is a great compliment. I do have plans for above the pantry door. I am putting a Enkeboll (wood carving) there. great idea and i'll take all the advice I can get.
there will be more photos coming.
Bob
cool!
yes the sink is on the left with a dishwasher and the cooktop is on the right with large pullouts for pots and pans. I do the cooking in the house so I wanted everything close by.
THANK YOU! I just became a member yesterday so I was scared to post my photos. your all very kind.
the sink is on the left on the island along with the dishwasher and the cooktop is on the right side of the island.
thanks for the reply Douglas.
Bob