Fillet and Chamfer

[BCrouse]

What would cause the fillet and chamfer work with wall? When I would want fillet 2 walls. The wall would not be noticed.

thank you,

Brad

[david_peterson]

Brad,

I'm guessing you made this post in one heck of a hurry. Can you please clarify what you mean.
Thanks

[cholmes]

Which version of ADT are you using? I know in 3.3 in order to fillet walls, you had to use a special command "AECFillet"
In newer versions you dont need this, you can just use the regular fillet command. (I think ADT actually redefines the fillet command to use this command)

[BCrouse]

Brad,

I'm guessing you made this post in one heck of a hurry. Can you please clarify what you mean.
Thanks

I am sorry for not explaining myself more clearly. When I try to fillet 2 walls together. The walls will not be recognize by the fillet command.

[david_peterson]

In 2005 it works.
The only thing that might make a difference is making sure you select the correct side of the wall.
If a wall is draw left, I think you may need to pick the left side of the wall.
If you still can't fillet the wall together, check your baseline elevation.
What type of message do you get when you try to fillet the walls together?

[Steve_Bennett]

I am sorry for not explaining myself more clearly. When I try to fillet 2 walls together. The walls will not be recognize by the fillet command.

Another possibility is that you have two walls on top of each other or you have lines on top of your walls & you are picking a wall on one side & a line on the other.

[BCrouse]

In 2005 it works.
The only thing that might make a difference is making sure you select the correct side of the wall.
If a wall is draw left, I think you may need to pick the left side of the wall.
If you still can't fillet the wall together, check your baseline elevation.
What type of message do you get when you try to fillet the walls together?

Here is the message that I get when I try to fillet two wall. (Fillet requires 2 lines, arcs, or circles.)

[david_peterson]

Well,

If you checked everything else listed in this post and you are still getting this message, I'm at a loss.
Can you post a copy of said file? Or is this in every file you have?
If I can re-produce the error, I'll know it's a file issue rather than an install/ADT type issue.
Are you using 2005?

[cholmes]

It looks like to me it is using just the standard Autocad fillet command. Try Aecfillet.
Like I said, in later versions you shouldn't have to do this, but maybe you have a profile that is loading standard autocad commands, instead of the ADT ones. Or you are using and older version of ADT. Which version are you using?

[BCrouse]

It looks like to me it is using just the standard Autocad fillet command. Try Aecfillet.
Like I said, in later versions you shouldn't have to do this, but maybe you have a profile that is loading standard autocad commands, instead of the ADT ones. Or you are using and older version of ADT. Which version are you using?

I am using ADT2005