Linetype scale

[susanima]

When I scale a drawing with the scale factor 0.1 the polylines (ACAD_ISO03W 100) in the drawing don't scale. I have tried to change the linetype scale in the properties-dialog box from 1 to 0.1 but it accepts only integers.

The drawing is attached, thank you for any help.

[Mike.Perry]

When I scale a drawing with the scale factor 0.1 the polylines (ACAD_ISO03W 100) in the drawing don't scale. I have tried to change the linetype scale in the properties-dialog box from 1 to 0.1 but it accepts only integers.

Hi

What Polylines? the sample drawing file (Polyline-example.dwg) posted does not contain any...

Anyway, do you mean the following -

Open drawing file "Polyline-example.dwg"

Scale -> Select ALL -> Scale factor: 0.1

If yes, once you have completed the above procedure you need to reset LTScale = 0.1 to see (view) the same length Dashes & Gaps as before.

Personally I would recommend not changing the Linetype Scale via the Properties Window, by doing so you are actually altering Objects CELTScale value.

Side note - Do you use Modelspace & Paperspace (Layouts)?

Have a good one, Mike