Originally Posted by
stelthorst
Hi bjensen.48049, (Sorry I don't know your name)
I work for an electrical contractor and always need to see the floor above and below in order to see where to bring my conduits and cable trays through the slabs. I usually don't need to print the drawings like this but I have created a display configuration to let me see the floors above and below. I have included a sample project with the display configuration. If you open up the second floor drawing in the project (FP-02.dwg) you should see the floor below in magenta with hidden linetype and the floor above in yellow with hidden linetype. I have limited this configuration to only show walls and doors. The display configuration is named "Floor Above-Below" (I know, pretty creative name)
The key to the configuration is to set your Display Above Range and Display Below Range larger than your floor to floor height. In my sample project my floor to floor height is 10' and I have the Display Below Range set at -1'-0" and my Display Above Range set at 11'-0" You can view this by going to FORMAT - Display Manager - click the + sign next to Configurations, click the Floor Above-Below configuration and click on the cut planes tab.
I hope this will work for you and if you have any questions feel free to post back.