Fler Sub-forum?

[jens.liljegren]

Hej, skulle det inte vara bra med en Autocad/Autocad LT sub-forum?

/Jens

[Soren P. Sorensen]

Hej Jens

Det syntes jeg lyder som en god idè.
Kunne du tænke dig at være moderator på den ?

[jens.liljegren]

Jag har ingen erfarenhet av att vara en forummoderator, tyvärr.

[jens.liljegren]

Vilka uppgifter måste jag utföra om jag ska vara moderator?
Hjälper gärna till.

Mvh. Jens

[CGM]

Hej Jens

Det syntes jeg lyder som en god idè.
Kunne du tænke dig at være moderator på den ?

Hi guys,
I am afraid my Danish isn't up to following the discussion.
To have LT forums is certainly a good idea; you will need to contact the forum manager, Mike Perry to put them in place.

I hope this remark of mine is of help to you.

[Alan_T]

Nu vi er i gang
Hvad med en Civil 3D sub-forum

[jens.liljegren]

Tråkigt att det är så dålig aktivitet på de Nordiska forumen

[alk]

Jeg er sikker på Søren gerne vil oprette flere sub-forums, hvis der er nogle der gerne vil være moderatorer.
Jeg har kopieret noget af en mail fra Mike Perry, det bliver lidt langt men jeg har desværre ikke et AUGI link til teksten

Below is some general info, that might prove helpful / useful...

Q: What makes a good moderator?

A: Someone who gets enjoyment, satisfaction from helping others.

* Happy and willing to work through a forum users query / request.

* Professional, polite, well mannered.

* Ability to access the forums on an almost daily bases (just to check in and make sure everything appears to be ok!).

* If / When required to apply AUGI Forum Guidelines [ http://forums.augi.com/faq.php?faq=vb_augi ] due to an infringement of those guidelines, will do so in a professional and well mannered way.

* Does not abuse the extra privileges given.

Q: Why would someone want to be a moderator?

A: Gets enjoyment, satisfaction from helping others.

* Wants to give a little more to the AUGI community.

Q: Do I need to be an expert / guru in the related Autodesk product software?

A: Being a so called expert in the related software is definitely not! a requirement.

* Moderating pretty much comes down to common sense, first impression, gut feeling etc.

* Always try your very best to keep personal feelings out of a situation.

* Always be professional and polite when having to deal with a situation.

* If ever in doubt about something, always go to the Moderators Forum area [ http://forums.augi.com/forumdisplay.php?f=760 ] first and ask for advice, guidance, help there before taking any action.

* Remember all forum Moderators work as a team, therefore we are always available to help one another.

-Anders

[patrick.ericson]

Nu vi er i gang
Hvad med en Civil 3D sub-forum

Tjenis!!

Jag kan bara hålla med. Det skulle vara kul att få lite grepp om vilka som använde civil 3d här runt omkring både inom Sverige och resten av norden.

Folk har väl antagligen massor med erfarenhet som jag gärna tar del av. Har pratat med en kille i Kristianstad, södra Sverige och hört om att det är på gång någon form av användargrupp i Sverige. Ska bli kul att se hur det går!!!

Cadda lugnt!!

//Patrick, Jönköping