Quick Select - Now that ain't right!

[CADMama]

Something has happened to my Quick Select - I no longer get some properties in the window but this only happens for AEC objects only!

OK so maybe ADT 3.3 knows I have been working on another computer to get things ready to replace it - but - this still ain't right!

I used to see "Walls" and now I see "AEC_WALL" and the only properties I can see are:
Color
Layer
Linetype
Linetype scale
Plot style
Lineweight
Hyperlink

All of my AEC objects are like this.
Any ideas?
I can't wait to get to 2005 - just a little more customization to go and I am SO OUT OF 3.3!!!

Donnia

EDITED HERE - I found this on two machines - the only two machines that I have loaded 2005 on recently. DARN - what happend to side by side???

[mjfarrell]

Is it possible you are looking at one of the other tabs?

I opened ADT3.3 and it behaves exactly as you describe
in short it isn't broken. Or mine is too......

[CADMama]

Is it possible you are looking at one of the other tabs?

What other tabs?

[richard.binning]

What other tabs?

What problems are you having?...I am running ADT 3.3 and ADT 2005 side by side at the same time and do not experience what you were talking about. See below:

[mjfarrell]

Richard CADmama and I poked at this for a while,
I think she decided that this was the most probable
solution (she didn't tell me if she tested it)
http://usa.autodesk.com/adsk/servlet...linkID=2476059

[richard.binning]

Richard CADmama and I poked at this for a while,
I think she decided that this was the most probable
solution (she didn't tell me if she tested it)
http://usa.autodesk.com/adsk/servlet...linkID=2476059

The 16 step dance...how painful. Want an Object DBX routine to do this without opening the file in autoCAD? Grab it from my AU microsite

Look under miscellaneous and grab and run hatchfix.dvb

RLB

[CADMama]

The 16 step dance...how painful. Want an Object DBX routine to do this without opening the file in autoCAD? Grab it from my AU microsite

Look under miscellaneous and grab and run hatchfix.dvb

RLB

OK - that was not it - I have not hatched using either AEC objects or Xrefs.

Any other ideas???

Pained with my Qselect in Tennessee,
Donnia

[richard.binning]

I think you will need to run the "repair" option in ADT 3.3.
You should probably post this in the autodesk NG and see
if any of the developers have run into this problem in the past.

RLB

[CADMama]

Something has happened to my Quick Select - I no longer get some properties in the window but this only happens for AEC objects only!

OK so maybe ADT 3.3 knows I have been working on another computer to get things ready to replace it - but - this still ain't right!

I used to see "Walls" and now I see "AEC_WALL" and the only properties I can see are:
Color
Layer
Linetype
Linetype scale
Plot style
Lineweight
Hyperlink

All of my AEC objects are like this.
Any ideas?
I can't wait to get to 2005 - just a little more customization to go and I am SO OUT OF 3.3!!!

Donnia

EDITED HERE - I found this on two machines - the only two machines that I have loaded 2005 on recently. DARN - what happend to side by side???

Software Repair - fixed me right up.
Thanks all.
Donnia