See the top rated post in this thread. Click here

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Manufacturers providing Revit Families

  1. #1
    The Silent Type RobertB's Avatar
    Join Date
    2000-01
    Location
    Seattle WA USA
    Posts
    5,859
    Login to Give a bone
    3

    Thumbs up Manufacturers providing Revit Families

    AAON
    This initial page only refers to the selection software. However, after agreeing to the terms and conditions the subsequent page will have a section for downloading Revit files.

    Acuity Brands Lighting
    AERCO
    Air Balance, Inc.
    Alkco Lighting
    American Standard
    Anvil
    A.O. Smith
    Applied Air also on Autodesk Seek

    Belden
    Bell & Gossett
    Beta-Calco
    Big ... Fans
    Blücher
    Bradley

    CaptiveAire
    Carrier
    Cashman CAT Generators
    Charlotte Pipe
    ClimateMaster
    Cooper B-Line

    DuctSox

    Eaton
    Elkay

    Florida Heat Pump
    Focal Point

    Great Lakes Case & Cabinet
    Greenheck
    Grundfos/Paco Pumps

    Hamilton Laboratory Furniture and Fume Hoods
    [http://www.arcat.com/bim/hubbell/hubbell.shtml]Hubbell[/url] and alternate site
    HydroTherm

    International Environmental Corporation (IEC)

    Johnson Controls, Inc./York

    Kenall Lighting
    Kinetics Noise Control
    Kohler
    Krueger

    Lightolier
    LG HVAC
    LJ Wing also on Autodesk Seek
    Lochinvar
    Loren Cook
    Lutron

    Marley
    McQuay
    METALAIRE
    Metraflex
    Mitsubishi Electric and Electronics
    Mono-Systems

    Nailor Industries
    Site registration and software download required.

    NIBCO

    Pathway Lighting
    PennBarry
    Philips Day-Brite also on Autodesk Seek
    Philips Ledalite
    Philips Omega also on Autodesk Seek
    Price

    Q-Tran

    RBI
    Ruskin

    Siemon
    Sierra also on Autodesk Seek
    Sloan
    Spirotherm
    This page only refers to drawings but the subsequent pages include Revit downloads.

    SteelSelect
    Sterling

    Taco
    Temprite Industries also on Autodesk Seek
    Titus
    Toto

    Trane Rooftop Units
    Trane is not very transparent. See the note below.
    Trane will release the first set of BIM objects (Revit & Bentley compatible) at the end of [May 2009]. However, you will have to go through a Trane Sales Engineer to get them. The reason for this is the files will include information specific to the product based on the selection made from our selection program, TOPSS. As of now, I do not know of any plan to place common files on the website. If they do, they would most likely be located with the other CAD templates (http://www.trane.com/Commercial/Prod...ct.aspx?i=1154).
    Trane's statement on their website.

    Tuttle & Bailey

    Victaulic
    Viking
    Visa Lighting

    WaterFurnace
    Watts

    Misc
    Autodesk Seek
    CADdetails.com
    RevitCity.com
    Reed Construction SmartBIM

    Not free Revit MEP families
    Andekan
    CADworks BIMXchange

    Feedback to Autodesk Seek
    seek.designers@autodesk.com

    Please send me a private message for items to add to this list. This will help keep the sticky post organized. (Thanks, Beancud, for the original idea!)
    Last edited by RobertB; 2012-08-09 at 07:29 PM.
    R. Robert Bell
    Design Technology Manager
    Stantec
    Opinions expressed are mine alone and do not reflect the views of Stantec.

  2. #2
    Member
    Join Date
    2010-10
    Posts
    24
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    A word of warning to those of you looking for No-Hub fittings from Charlotte Pipe......don't expect much.

    I haven't sampled the entire catalog....I stopped downloading them after seeing how poorly the elbows and tees work. If they can't get the simple (and most commonly used) fittings right, I'm not even wasting my time on the rest of them.

  3. #3
    Member
    Join Date
    2012-09
    Posts
    4
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Does anybody know where I can download a return air plenum or mixing box?

  4. #4
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Hello a1abrams694127,

    Good day!

    Try this one












    Ray Grimm
    A.W.E. Company

  5. #5
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Hello I am just dropping by:

    I just want to help and I would like to warn everyone. Don't just download anywhere or any sites because some downloadable files has a virus with it. Plead read there feedback. Just an advice because I already experience it.

    God Bless everyone!

    Thanks!
    JM

  6. #6
    Member
    Join Date
    2013-08
    Posts
    2
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Where can I download Revit Families, good quality revits?? Revitcity has a very poor quality, I'm now downloading them at continoin.com, but I want to see if you have another one where I can download them

  7. #7
    Member
    Join Date
    2013-10
    Posts
    2
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Hi, Just wanted to add this link for Thorlux lighting.


  8. #8
    Active Member
    Join Date
    2015-10
    Location
    Chicagoland
    Posts
    73
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Quote Originally Posted by juanpialva407497 View Post
    Where can I download Revit Families, good quality revits?? Revitcity has a very poor quality, I'm now downloading them at continoin.com, but I want to see if you have another one where I can download them
    Autodesk Seek is a great resource. I'm finding a lot of manufacturer content there that I need. They have a written standard of how it must comply and I believe families are checked before being uploaded.

  9. #9
    Woo! Hoo! my 1st post
    Join Date
    2013-09
    Posts
    1
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Does anybody know where I can download Refrigeration condensers and evaporator blowers for cold & freezer rooms

  10. #10
    Login to Give a bone
    0

    Default Re: Manufacturers providing Revit Families

    Anybody found decent Power Busbar families and cable trunking?

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 2014-11-11, 08:09 PM
  2. 2012: Revit Detail Items from Manufacturers
    By ThinkRevit in forum Revit - Platform
    Replies: 0
    Last Post: 2013-05-04, 06:32 PM
  3. Families from Manufacturers
    By BenPudge72 in forum Revit Architecture - Families
    Replies: 7
    Last Post: 2012-02-13, 03:49 PM
  4. Manufacturers Creating Families
    By Scott D Davis in forum Revit Architecture - Families
    Replies: 1
    Last Post: 2004-12-15, 03:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •