modifyable section boxes?

[WolffG]

I assume that I can create section boxes only in perspective views.
Is there a way to create a similar view which is editable?

I am currently working on a four unit townhouse project with a rather complicated roof and fire wall system and it would be very helpful to be able to work through it from one end to the other by taking a slice off the salami (so to speak) one at a time and analyze the building one step at a time. Using the "hide isolate" feature isn't really very useful in this. Obviously, this can be done with sections, but using a 3D model makes a lot of the issues much more obvious much quicker.

[iankids]

Hi WolffG,

The section box is available in all 3d views and is activated by the tick box in the view properties. Once activated you can use the push / pull grips to slide the section box to whichever part of the building you wish to view.
Duplicated view - modify section box locations for new views.

Is this what you were after?

Cheers,

Ian

[WolffG]

Sorry, I probably wasn't too clear.
What I'm after is being able to edit the actual objects as you would in a sction or 3D isometric view.

[sfaust]

activate the section box for a 3D isometric view via view properties. You will be able to use the section box as well as edit actual objects.