Wall Wraps

[adnama]

Hi,

Could anyone recommend how I would create the attached wall type.

Example 1 shows the standard wall (as used around most of the building).
Example 2 shows an unusal variation of the wall that happens at a corner.

Any help would be greatly appreciated.

Regards

Paul

[patricks]

Looks like you're putting a door in a perpendicular wall such that the frame is butted right up against the other wall. If you have 2 walls at that location (one has to host the door) and then set the exterior stone to wrap at inserts, it should work as you illustrated.

[greg.mcdowell]

If you get this to work I'd love to see your Revit file - I've not done much with wall wraps and this looks like a very informative experiment.

[patricks]

Well it's not exactly the same, but it looks pretty darn close... close enough that the detail could be handled in, well... the details. :)

All I did was set the wall wrapping to exterior at inserts, and then align the door to the perpendicular wall, and change the door's inset and frame depth dimensions.

[adnama]

Thats pretty damn good and it is perfect for what I need. The solution is so simple when you see it already done.

Thanks for your help - I really appreciate it!

Paul