2D solids & pline fill not displaying - vanilla acad 09

[garden_chicken]

I'm out of ideas & under the gun. I have 2 drawings, both the same format, both containing polyline 'flow' arrows (starting width 0, ending width 1), and a polyline border with width assigned to it. One drawing displays fine, the other shows no fill. I have messed with the fillmode, done regens, etc. but can't get the fill to display in the one drawing. I've even tried drawing new ones with widths assigned, nothing shows up.

This is also an issue with the solids in the drawing.

WHAT am I missing????

TIA

Dallas

[jaberwok]

Possibly - PLAN (set to Current or World if you're using the WCS).
Possibly - TARGET - lets us know if it returns anything but 0,0,0.
Possibly - Visual Style - should be 2dwireframe.

[garden_chicken]

Found a quick work-around, just copied & pasted into a copy of the drawing that displayed properly - now I can get on with my day... thanks for your reply, this kind of stuff bugs me so I will try your suggestions & see if any of those fix it!

Thanks!

[Andy.88917]

You also might check your SHADEMODE and make sure it's "2D Wireframe". If I look at a model in "3D Hidden" view then go back to plan view without chaning the shademode then it does what you are describing. No pline widths, no solid hatch, etc.