Data Extraction from Profiles

[khalidisi]

I need to extract elevation data from two profiles; EG & FG into a table at a station interval of 20 meters as required by a client. So far, I have'nt been able to figure out a way to do it. Any assitance or guidance is highly appreciated.

Khalid

Civil 3D 2009
XP Pro SP3
3 GB Ram

[chris805_1996]

Have you tried the station increment report on the Reports tab on Toolspace?

Here's some revisions that could be made to make it work better: http://blog.civil3dreminders.com/2009/04/modifying-station-increment-report.html
http://blog.civil3dreminders.com/2008/09/modifying-incremental-stationing-report_14.html

[khalidisi]

Thanks Chris, but I can't figure out a way to include "Elevations" in the report. The report generates only "Northing", "Easting" & "Tangential Direction".

I will try to find a way to create the required code.

Thanks again for you help.

Khalid

[chris805_1996]

That sounds like the wrong report. You need the PVI Station Increment Report Here's a video on how to access it: http://screencast.com/t/NGQzMDg4

Here's how to get the EG profile to show up if it doesn't:
http://blog.civil3dreminders.com/2008/09/modifying-incremental-stationing-report.html
You'll have to use the VBA version of the report if it doesn't show up or modify the vb.NET code.

[khalidisi]

Thanks again Chris. This is exactly what I needed.
I am so grateful for your assitance.

Regards,

Khalid