Whats up with this?

[nsinha73]

Thats my detail component....but my controls are giving my headaches......every component is like that, even when I place my controls right at the Reference Lines.
Any ideas?

Thanks guys

[patricks]

This is an issue that has been around at least since the 2009 release. It's an issue with 2-pick line-based detail components that was not there when line-based components were first introduced.

I have made other posts about it in this forum, and even placed a SR with ADSK but no resolution ever came of it.

[patricks]

Check this post I made about it. My gyp board family currently has all types in the family set to 4 feet long for the default length, and the flip arrow near the middle, and it seems to work correctly, even with short instances of the component.

http://forums.augi.com/showthread.php?t=101036&highlight=line+based

*edit* I just verified it on a project using an old version of my plywood component, which was having the same problem. I checked my current version of the plywood component family, all looked correct, and I loaded it into the project using the 2nd Overwrite option, and now it's working like it should.