Brise soleil

[morgado_ruben]

I need help doing the brise soleil in the pictures.

I can edit the profile of a wall and draw the holes on it but the software gets heavy...

Anyone can explain other way of doing it?

the brise soleil is a 200x200x150mm with a 150mm hole.

Curtain wall?

Thank you

[twiceroadsfool]

Use a Curtain wall. Make a mullion the same thickness and material as the adjacent wall, set the Panel to none, and alter the spacing to be correct. :)

[morgado_ruben]

Thanks.

Should I do the mullions with a concrete material? And with size I need?

I tried to remove the glass from the panel...it says none...but it still renders the glass.

Any ideas?

[SCShell]

Thanks.

I tried to remove the glass from the panel...it says none...but it still renders the glass.

Any ideas?

Yes. Select "Empty Panel" vs modifying a panel by removing the glass.

Buena Suerte
Steve

[morgado_ruben]

perfect!

Did that but now the lines of the mullions dont intersect.

tried the "join condition" but no solution is perfect...that of a clean joint between vertical and horizontal mullions.

Thanks