cbrimley
2010-02-02, 09:05 PM
I built a series of surfaces with the conceptual mass template which I brought into my project to create the curtain wall facade. This worked well except for two surfaces that seem to be corrupted. The working surface allow me to apply a curtain wall and, if needed, adjust the curtain wall grid angles.
The problem surfaces will accept a curtain wall, however they will not allow me to adjust the angle of the grids on the surface. This is problematic because while Grid 2 (horizontal) is parallel to the ground, however Grid 1 (vertical) is askew. Additionally the Grid 1 seems to not be skewed at a constant angle. One grid-line may be at 90.24 degrees and the next may be at 90.56 degrees.
I have tried rebuilding the mass, I have tried creating it with different means, I have purged and compressed my files... but nothing seems to work.
Please advise.
The problem surfaces will accept a curtain wall, however they will not allow me to adjust the angle of the grids on the surface. This is problematic because while Grid 2 (horizontal) is parallel to the ground, however Grid 1 (vertical) is askew. Additionally the Grid 1 seems to not be skewed at a constant angle. One grid-line may be at 90.24 degrees and the next may be at 90.56 degrees.
I have tried rebuilding the mass, I have tried creating it with different means, I have purged and compressed my files... but nothing seems to work.
Please advise.