Precast Hollow Core Floor Plank

[swmarais]

Does anyone have a hollow core floor plank family to share?

Preferably 150 thick - in fact any thickness would work. I should be able to modify the profile to suit.

Thanks

[Alan aka cadalot]

These came as part of a UK subscription package in 2008, Just looked for them in 2010 and they are no longer there?

So I've asked Autodesk what's happened to them?

I will look to see if I made a backup of the download when I get back to work,

If I have then I will post them up here for you.

[swmarais]

Thanks Alan,

I would appreciate it greatly :)

[Silleke]

Maybe this will help you.

[swmarais]

Thank Silleke,
It will be a good starting point to create a 150 slab

[Silleke]

Welcome. It's my pleasure to help someone.
Good day.

[Alan aka cadalot]

Found it, they did add it to the core Metric Families / Structure / Framing / PreCast Concrete...... my mistake

[swmarais]

Thanks Alan...
Greatly appreciated !!

Schalk

[march]

Thank you Augi for putting forums back! I'm having a similar problem as described here - placing a hollow plank floor into a project. I have tried to create a structural profile and it is close but still wacky. What is the best practice for a non-typical floor plate with precast hollow plank floors?

Also I've tried to load this family file and I think the visibility is off - it does not appear in some views. Any help out there with hollow concrete plank floors much appreciated.

[G_J]

I'm having a similar problem as described here - placing a hollow plank floor into a project.

Can you expand a little on the problem you are having? - Placing a hollow plank floor into a project?



I have tried to create a structural profile and it is close but still wacky. What is the best practice for a non-typical floor plate with precast hollow plank floors?

I use a framing family (like the one attached above) for hollowcore planks, if the floor plate is non-typical - i.e not square.

I use the opening by face tool to get the desired shape in the planks.

[opesch]

FYI I personally use a symilar beam family (but with a less detailed section) with a beam system and it's perfect !

[jcook0317]

here is one I created using a structural framing-beam family