help me to my ceiling

[mj_lampad@yahoo.com]

I have just created a ceiling and encountering this problem, see attachment

details. sloping ceiling, the roof is 25 degrees slope. surface pattern of ceiling 600x600

pls help

[cliff collins]

Try rotating the model lines which represent the ceiling grids. Tab until you highlight one of the grid lines, then use the rotate command. If this doesn't work, then try this:

You may need to go to a section view, and place a reference plane which is at the angle
of your sloped ceiling. Name the ref. plane. under it's element properties.

Then, go back to the ceiling plan, and set the workplane to the new ref. plane you just made. You should now be able to select the model lines in the ceiling grid and rotates them, specifying and angle.

cheers

[mj_lampad@yahoo.com]

ok thanks I will try it

[mj_lampad@yahoo.com]

thanks man I have already done with that problem. and now I have again upload another situation which I saw in revit help pls see attach picture