Wall Material Layers

[Clyne Curtis]

Hey all,

I changed the wall style on my exterior walls, and now all of my sections are showing no material layers at all. In the plan they look good, and I checked the detail levels in the views and they are set to "fine". The walls appear empty! What gives?

Thanks,

Clyne

[Steve_Stafford]

Make sure your material settings for the wall style include a pattern for the cut display, assuming your view isn't set to coarse.

[Cyril Verley]

Also checj the view scale in the section views. Drop it to 1 1/2" = 1'-0" and the hatch should appear...

[Clyne Curtis]

Thanks for your help, I finally fixed it by adjusting the unconnected height from 7'4" to 20'. All the detail came back. Still not sure why, but glad it's there....

Thanks

Clyne