Elevation arrows moving, scope not?

[ron.sanpedro]

We have a project where two interior elevations have done the same rather odd trick. In both cases the interior elevation bubble did not use all four directions. On Friday everything was right, but today the arrow is pointing the wrong way, but the scope of the actual elevation is still correct. Anyone else seen this? And have a fix that is better than deleting and redoing the elevation?

Thanks!
Gordon

[Baldwin_4-6-0]

Weird! Revit 2010 or 2011?

[cdatechguy]

We have seen this if someone accidentally mirrors a room or the elevation tag itself....

At least you have one tag....we had it happen to a half a building.

[ron.sanpedro]

We have seen this if someone accidentally mirrors a room or the elevation tag itself....

At least you have one tag....we had it happen to a half a building.

2011, and no mirroring of rooms or tags. Indeed, as far as we can tell there was no activity in this area of the building at all. Very strange.

Gordon

[btrusty]

elevations 2 & 3 / A5.14 are correct?

[ron.sanpedro]

elevations 2 & 3 / A5.14 are correct?

Yup. And 1/A5.14 looks right as an elevation, only the direction of the arrow in plan is wrong. Buggy goodness. ;)

Gordon

[Ning Zhou]

using Audit recently?