printing , titleblock issue

[ntnik]

i have never had an issue with printing my sheets, i made a 11x17 sheet from a 24x36, i have tried every printing option i am printing on a 11x17 sheet so i had it centered and zoom 100%....the lower right hand corner is shifted up and over cutting off allot of the sheet...any ideas??

[aggockel50321]

Will the sheet itself (loaded into a project) with no views placed on it print correctly?

[patricks]

Did you keep the lower right corner in the same place when changing your 24x36 TB to 11x17 size? I believe that's what Revit uses as the origin as far as sheets are concerned.

If you did this and it still doesn't work, you might try starting a new 11x17 sheet from the OOTB 11x17 template, and copy/pasting the elements you need from the 24x36 template.

[ntnik]

i think you might be correct patricks, i will try this

[charliep]

I have the same problem. This is my first print job since installing the new update. No matter which size title block |I use (A0 to A3) or which printer, Adobe PDF, HP 1220 or Canon IPF750, the title block is off centre by 10mm verticaly and horizontaly. Never had this problem before the update.

[charliep]

For what it's worth I found the answer to my titleblock problem. For some reason my logo was pushing the titleblock about 10mm to the left. I reduced the text size slightly and moved the text in the logo further to the left. Works fine now.