Hanging tile details. How to go about it?

[barrie.sharp]

Have to add scalloped tiles and scalloped lead flashing. How would you guys do this?

[sbrown]

Use a fish scale hatch pattern and in your wall definition use the split region tool to split the height of the finish and assign the fish scale material to that area.

[barrie.sharp]

That's what I thought. I don't have a fish scale hatch though. It's not OOTB. How about the lead flashing? Would you model that (Wall hosted)?

[ws]

If it's any help I came across a recent tutorial on making hatch patterns for Revit using Hatchkit
http://blog.cadway.com.au/2010/05/revit-hatch-patterns-hatch-kit.html

The Hatchkit site has a page of hatch pattern links:
http://www.hatchkit.com.au/HatLinks.php

From there this link has a fishscale pattern listed that you could make into a hatch pattern:
http://www.shakertown.com/tech_drawings.html

... or the half round might be better looking at it again.


If it was me, I would use an in-place model for the lead flashing.

[SkiSouth]

might find a pattern to use HERE (http://forums.augi.com/showthread.php?t=22316&highlight=hatch)

[nancy.mcclure]

The lead flashing occurs only at the window units, so perhaps add this as a mass in the window family itself, or as it's own wall-hosted family.

[barrie.sharp]

Thanks all. That's plenty to go on. Should be able to get this one out the door.:beer: